NX-MD6121-6
16 entradas digitales + 16 salidas NPN digitales, velocidad estándar, 24 VCC, 2 conectores FCN24 (no incluidos), 30 mm de ancho
Especificações
| I/O system | NX I/O Bus |
| Type of module | Digital I/O |
| Number of digital inputs | 16 |
| Digital input type | PNP/NPN |
| Permitted voltage at input | 15-28.8 V |
| OFF/ON delay | 0.02-0.4 ms |
| Number of digital outputs | 16 |
| Digital output type | NPN |
| Permitted voltage at output | 10.2-28.8 V |
| Output current | 0.5 A |
| Short-circuit protected outputs | |
| Connection method | 1-wire |
| Signal processing | Free running, Standard speed, Synchronous |
| IO-Link master | |
| I/O connection type | FCN (plug not included) |
| Number of I/O connectors | 2 |
| Detachable I/O connector | |
| Suitable for safety functions | |
| SIL according to IEC 61508 | None |
| Communication port(s) | None |
| Number of IOV (V+) terminals | 2 |
| Number of IOG (V-) terminals | 2 |
| Number of COM terminals | 2 |
| Degree of protection (IP) | IP20 |
| Product Height (unpacked) | 100 mm |
| Product Width (unpacked) | 30 mm |
| Product Depth (unpacked) | 72.5 mm |
| Product Weight (unpacked) | 150 g |
Acessórios
| G70A-ZOC16-3 DC24 | Módulo 16 Relés Saída NPN 24Vdc |
|
|
| G70V-SID16P | Bloco 16 relés G2RV Entrada plc NPN Push-in+ |
|
|
| G70V-SID16P-1 | Bloco 16 relés G2RV Entrada plc PNP Push-in+ |
|
|
| XW2D-20G6 | Bloco conector 20 pontos E/S Slim |
|
|
| XW2K-20G-O16A-IN | Sistema de cabeamento de interface PLC com tecnologia push-in plus e terminal de alimentação, conector MIL de 20 pontos, Entrada, Sinal: 0,5 A, Alimentação: 4 A, NPN, 30 VDC, montagem em calha DIN horizontal e vertical |
|
|
| XW2K-20G-O16B-OUT | Sistema de cabeamento de interface PLC com tecnologia push-in plus e terminal de alimentação, conector MIL de 20 pontos, Saída, Sinal: 0,5 A, Alimentação: 4 A, NPN, 30 VDC, montagem em calha DIN horizontal e vertical |
|
|
| XW2K-20G-T | Sistema de cabeamento de interface de uso geral com tecnologia push-in plus, conector MIL de 20 pontos, entrada/saída, 1 A, NPN/PNP, 125 VCA, 30 VCC, montagem horizontal e vertical em calha DIN |
|
|
| XW2Z-0100AD-L | Cabo conexão E/S, FCN24 a MIL20, L = 100 cm |
|
|
| XW2Z-0100AL-L | Cabo conexão E/S, FCN24 a ponteiras, L = 100 cm |
|
|
| XW2Z-0200AD-L | Cabo conexão E/S, FCN24 a MIL20, L = 200 cm |
|
|
| XW2Z-100A | Conector Fujitsu para Módulo XW2x 1:1 (1m) |
|
|
| XW2Z-200A | Conector Fujitsu para módulo XW2x 1:1 (2m) |
|
|
| XW2Z-R100C | I/O connection cable, with shield connection, FCN24 to MIL20 for G70A-ZOC16-3 / G70A-ZIM16-5, 1 m. |
|
|
| XW2Z-R200C | Cabo G7TC Módulo PLC (2m) |
|
Downloads
