
NX1
Informações e produtividade num controlador em miniatura
O controlador modular de máquinas da série NX1 proporciona funcionalidades de sequência lógica, motion e dados. A série NX1 alia os mundos da produção e da informática, minimizando a engenharia e a manutenção e suprimindo o middleware.
- Compatível com IoT: servidor OPC UA integrado de série; são suportadas estruturas variáveis
- Ligação directa à base de dados: cliente SQL para servidor Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL
- Memória extensa para manuseamento de dados: 33,5 MB para variáveis
- Controlador sem bateria
- Tempo de ciclo: a partir de 1 ms
- Até 12 eixos (8 eixos de motion sincronizados e 4 PTP)
- Um ciclo único e sincronizado para E/S local e remota, dispositivos EtherCAT e controlo de motion
- Na versão 2.0, a ligação directa à base de dados foi alargada com as chamadas de procedimento armazenadas e a funcionalidade de comunicações seguras
- Ligação directa à base de dados: cliente SQL para servidor Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL
- Controlador multitarefas
- Conectividade de rede expandida, 2 portas Ethernet + 1 EtherCAT
- Até 32 unidades NX locais, incluindo unidade de comando IO-Link e segurança
- Suporta até 64 nós EtherCAT (400 unidades NX)
- A topologia em anel EtherCAT é suportada para manter as comunicações e o controlo em caso de uma falha no dispositivo ou um cabo danificado
Especificações e info encomendas
Ordering information
NX1 series CPU units
CPU | Program capacity | Variables capacity | Number of axes | Functionalities | Order code | |||||
---|---|---|---|---|---|---|---|---|---|---|
Real axes | Motion control servo axes | Single-axis position control axes | Sequence | OPC UA | Motion | DB connection | ||||
NX102 | 5 MB |
1.5 MB: Retained 32 MB: Not retained |
12 axes | 8 axes | 4 axes | NX102-1220 | ||||
– |
NX102-1200 | |||||||||
8 axes | 4 axes | NX102-1120 | ||||||||
– | NX102-1100 | |||||||||
6 axes | 2 axes | NX102-1020 | ||||||||
– | NX102-1000 | |||||||||
4 axes | 0 axes | – | NX102-9020 | |||||||
– | – | NX102-9000 |
The end cover unit NX-END02 is included with the CPU unit.
NX I/O units (local and remote I/O)
Up to 32 local NX I/O units can be connected to an NX1 CPU unit.
Communication and control units
Module Type | Protocol | Connection | Specification | Width | Order code |
---|---|---|---|---|---|
Communication coupler | EtherCAT Slave |
2 RJ45 ports (in + out) |
Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A |
46 mm | NX-ECC203 |
Safety controller | FSoE Protocol | 128 Safety connections | For up to 1,024 safety I/O points | 30 mm | NX-SL3500 |
32 Safety connections | For up to 256 safety I/O points | NX-SL3300 |
IO-Link master unit
Module Type | No. of ports | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|
IO-Link master unit | 4 | Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-ILM400 |
For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.
Digital I/O units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
|
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AC Digital Input | 4 inputs, 200 to 240 VAC, 50/60 Hz | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-IA3117 | – | ||||||||||||||||||||||||||||||||||||
Safety Digital Input | 4 inputs + 2 test outputs | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SIH400 | – | ||||||||||||||||||||||||||||||||||||
8 inputs + 2 test outputs | Screwless push-in (NX-TBA162) | NX-SID800 | – | |||||||||||||||||||||||||||||||||||||||
DC Digital Input | 4 inputs, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA122) | 12 mm | NX-ID3444 | NX-ID3344 | ||||||||||||||||||||||||||||||||||||
High-speed Synchronous/Free Run | NX-ID3443 | NX-ID3343 | ||||||||||||||||||||||||||||||||||||||||
Synchronous/Free Run | NX-ID3417 | NX-ID3317 | ||||||||||||||||||||||||||||||||||||||||
8 inputs, 2-wire connection | Screwless push-in (NX-TBA162) | NX-ID4442 | NX-ID4342 | |||||||||||||||||||||||||||||||||||||||
16 inputs, 1-wire connection | NX-ID5442 | NX-ID5342 | ||||||||||||||||||||||||||||||||||||||||
1 × 20-pin MIL connector | 30 mm | NX-ID5142-5 | same | |||||||||||||||||||||||||||||||||||||||
M3 screw | NX-ID5142-1 | same | ||||||||||||||||||||||||||||||||||||||||
32 inputs, 1-wire connection | 1 × 40-pin MIL connector | NX-ID6142-5 | same | |||||||||||||||||||||||||||||||||||||||
1 × 40-pin Fujitsu connector | NX-ID6142-6 | same | ||||||||||||||||||||||||||||||||||||||||
DC Digital I/O | 16 inputs + 16 outputs 0.5 A, 1-wire connection + common | Synchronous/Free Run | 2 × 20-pin MIL connector | 30 mm | NX-MD6256-5 | NX-MD6121-5 | ||||||||||||||||||||||||||||||||||||
2 × 24-pin Fujitsu connector | – | NX-MD6121-6 | ||||||||||||||||||||||||||||||||||||||||
DC Digital Output | 2 outputs 0.5 A, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA082) | 12 mm | NX-OD2258 | NX-OD2154 | ||||||||||||||||||||||||||||||||||||
4 outputs 0.5 A, 3-wire connection | High-speed Synchronous/Free Run | Screwless push-in (NX-TBA122) | NX-OD3257 | NX-OD3153 | ||||||||||||||||||||||||||||||||||||||
Synchronous/Free Run | NX-OD3256 | NX-OD3121 | ||||||||||||||||||||||||||||||||||||||||
4 outputs 2 A/point, 8 A total, 3-wire connection | Screwless push-in (NX-TBA162) | NX-OD3268 | – | |||||||||||||||||||||||||||||||||||||||
8 outputs 0.5 A, 2-wire connection | NX-OD4256 | NX-OD4121 | ||||||||||||||||||||||||||||||||||||||||
16 outputs 0.5 A, 1-wire connection | NX-OD5256 | NX-OD5121 | ||||||||||||||||||||||||||||||||||||||||
1 × 20-pin MIL connector | 30 mm | NX-OD5256-5 | NX-OD5121-5 | |||||||||||||||||||||||||||||||||||||||
M3 screw | NX-OD5256-1 | NX-OD5121-1 | ||||||||||||||||||||||||||||||||||||||||
32 outputs 0.5 A, 1-wire connection | 1 × 40-pin MIL connector | NX-OD6256-5 | NX-OD6121-5 | |||||||||||||||||||||||||||||||||||||||
1 × 40-pin Fujitsu connector | – | NX-OD6121-6 | ||||||||||||||||||||||||||||||||||||||||
Safety Digital Output | 2 outputs, 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SOH200 | – | ||||||||||||||||||||||||||||||||||||
4 outputs, 0.5 A | NX-SOD400 | – | ||||||||||||||||||||||||||||||||||||||||
Relay Digital Output | 2 outputs, N.O., 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2633 | – | ||||||||||||||||||||||||||||||||||||
8 outputs, N.O., 2.0 A | Screwless push-in (NX-TBA082 × 2) | 24 mm | NX-OC4633 | – | ||||||||||||||||||||||||||||||||||||||
2 outputs, N.O.+ N.C., 2.0 A | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2733 | – |
Analog I/O units
Module type | Signal type | Performance, I/O Refresh Mode | Channels | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Temperature Sensor -Input | Thermocouple type B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory | 12 mm | NX-TS2101 |
4 | 24 mm | NX-TS3101 | ||||
0.01°C resolution, 10 ms/unit Free Run |
2 | 12 mm | NX-TS2102 | |||
4 | 24 mm | NX-TS3102 | ||||
0.001°C resolution, 60 ms/unit Free Run |
2 | 12 mm | NX-TS2104 | |||
4 | 24 mm | NX-TS3104 | ||||
RTD type Pt100 (3-wire), Pt1000, Ni508.4 |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2201 | |
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3201 | |||
0.01°C resolution, 10 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2202 | ||
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3202 | |||
0.001°C resolution, 60 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2204 | ||
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3204 | |||
Analog Input | 4 to 20 mA single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-AD2203 |
4 | Screwless push-in (NX-TBA122) | NX-AD3203 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4203 | ||||
4 to 20 mA differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2204 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3204 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4204 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2208 | |||
4 | Screwless push-in (NX-TBA122) | NX-AD3208 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4208 | ||||
–10 to 10 V single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2603 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3603 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4603 | ||||
–10 to 10 V differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2604 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3604 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4604 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2608 | |||
4 | Screwless push-in (NX-TBA122) | NX-AD3608 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4608 | ||||
High-Speed Analog Input | –10 to 10 V, –5 to 5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA differential |
–10 to 10 V or –5 to 5 V: 1/64000 Other input range: 1/32000 5 µs/channel Synchronous |
4 (NPN) | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-HAD401 |
4 (PNP) | NX-HAD402 | |||||
Analog Output | 4 to 20 mA | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-DA2203 |
4 | Screwless push-in (NX-TBA122) | NX-DA3203 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2205 | |||
4 | Screwless push-in (NX-TBA122) | NX-DA3205 | ||||
–10 to 10 V | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2603 | ||
4 | Screwless push-in (NX-TBA122) | NX-DA3603 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2605 | |||
4 | Screwless push-in (NX-TBA122) | NX-DA3605 |
Temperature control units
Module type | Conversion time, I/O Refresh Mode |
Channels | Input type | Output type | Output capacity | CT Input capacity | Control type | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|---|---|---|---|
Temperature control |
50 ms Free run |
2 | Multi-input (Thermocouple and Resistance thermometer) |
Voltage output (for driving SSR) | 2 points | 2 points | Standard | Screwless push-in (NX-TBA162) | 12 mm | NX-TC2405 |
– | NX-TC2406 | |||||||||
4 points | Heating and Cooling | NX-TC2407 | ||||||||
Linear current output | 2 points | Standard | NX-TC2408 | |||||||
4 | Voltage output (for driving SSR) | 4 points | 4 points | Standard | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TC3405 | |||
– | NX-TC3406 | |||||||||
8 points | Heating and Cooling | NX-TC3407 | ||||||||
Linear current output | 4 points | Standard | NX-TC3408 |
Heater burnout detection units
Module type | Channels, signal type | Control output | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Heater burnout detection | 4 CT inputs 4 control outputs |
NPN, 12 to 24 VDC 0.1 A/point, 0.4 A/unit |
Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-HB3101 |
PNP 24 VDC 0.1 A/point, 0.4 A/unit |
NX-HB3201 |
Load cell input unit
Module type | Specifications | Excitation voltage/input range | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Load cell input | 1 load cell input, 125 µs conversion cycle | 5 VDC ±10%/–5 to 5 mV/V | Synchronous/ Free Run |
Screwless push-in (NX-TBC162) | 12 mm | NX-RS1201 |
Position control units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Encoder Input | 1 SSI encoder, 2 MHz | Synchronous/Free Run | Screwless push-in (NX-TBA122) | 12 mm | NX-ECS112 | – | ||||||||||||||||||||||||||||||||||||
2 SSI encoders, 2 MHz | NX-ECS212 | – | ||||||||||||||||||||||||||||||||||||||||
1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA122 + NX-TBB122) |
24 mm | NX-EC0142 | NX-EC0132 | ||||||||||||||||||||||||||||||||||||||
1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA162) | 12 mm | NX-EC0122 | NX-EC0112 | ||||||||||||||||||||||||||||||||||||||
2 incremental encoders open collector 500 kHz | Screwless push-in (NX-TBA122) | NX-EC0222 | NX-EC0212 | |||||||||||||||||||||||||||||||||||||||
Pulse Output | 1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs) | Synchronous | Screwless push-in (NX-TBA162) | 12 mm | NX-PG0122 | NX-PG0112 | ||||||||||||||||||||||||||||||||||||
2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 1 × 34-pin MIL connector | 30 mm | NX-PG0242-5 | NX-PG0232-5 | ||||||||||||||||||||||||||||||||||||||
4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 2 × 34-pin MIL connector | NX-PG0342-5 | NX-PG0332-5 |
Serial communication interface units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Serial Communication | 1 × RS-422A/485 | Free Run | Screwless push-in (NX-TBC162) | 12 mm | NX-CIF105 | – | ||||||||||||||||||||||||||||||||||||
1 × RS-232C | NX-CIF101 | – | ||||||||||||||||||||||||||||||||||||||||
2 × RS-232C | 9-pin D-sub | 30 mm | NX-CIF210 | – |
Other units
Module type | Description | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|
Power Unit | NX bus power supply unit, 24 V DC input, non-isolated | Screwless push-in (NX-TBC082) | 12 mm | NX-PD1000 |
I/O power feed unit, for separation of power groups, up to 10 A | Screwless push-in (NX-TBA082) | NX-PF0730 | ||
I/O power connection unit, 16 × IOV | Screwless push-in (NX-TBA162) | NX-PC0020 | ||
I/O power connection unit, 16 × IOG | NX-PC0010 | |||
I/O power connection, 8 × IOV + 8 x IOG | NX-PC0030 | |||
System Units and -Accessories | Grounding terminal, 16 points | Screwless push-in (NX-TBC162) | NX-TBX01 | |
End cover (included with Communication Coupler) | – | NX-END01 | ||
Replacement front connector with 8 wiring terminals (marked A+B) | Screwless push-in | NX-TBA082 | ||
Replacement front connector with 12 wiring terminals (marked A+B) | NX-TBA122 | |||
Replacement front connector with 16 wiring terminals (marked A+B) | NX-TBA162 | |||
Replacement front connector with 12 wiring terminals (marked C+D) | NX-TBB122 | |||
Replacement front connector with 16 wiring terminals (marked C+D) | NX-TBB162 | |||
Replacement front connector with 8 wiring terminals (marked A+B+FG) | NX-TBC082 | |||
Replacement front connector with 16 wiring terminals (marked A+B+FG) | NX-TBC162 | |||
DIN rail insulation spacers, set of 3 pcs | – | NX-AUX01 | ||
30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units) | – | NX-AUX02 |
Recommended EtherCAT and EtherNet/IP communication cables
Item | Manufacturer | Color | Cable length (m) | Order code | ||
---|---|---|---|---|---|---|
EtherCAT cable |
Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCATcommunications |
Standard type Cable with connectors on both ends (M12 straight/M12 straight) |
OMRON | Black | 0.5 | XS5W-T421-BM2-SS |
1 | XS5W-T421-CM2-SS | |||||
2 | XS5W-T421-DM2-SS | |||||
3 | XS5W-T421-EM2-SS | |||||
5 | XS5W-T421-GM2-SS | |||||
10 | XS5W-T421-JM2-SS | |||||
Rugged type Cable with connectors on both ends (M12 straight/RJ45) ![]() |
Black | 0.5 | XS5W-T421-BMCSS | |||
1 | XS5W-T421-CMC-SS | |||||
2 | XS5W-T421-DMC-SS | |||||
3 | XS5W-T421-EMC-SS | |||||
5 | XS5W-T421-GMC-SS | |||||
10 | XS5W-T421-JMC-SS | |||||
Ethernet/EtherCAT patch cable |
Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH
2 ,The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use.
2
This cable is available
in yellow, green and blue colors. |
Standard type Cable with connectors on both ends (RJ45/RJ45)![]() |
Yellow | 0.2 | XS6W-6LSZH8SS20CM-Y | |
0.3 | XS6W-6LSZH8SS30CM-Y | |||||
0.5 | XS6W-6LSZH8SS50CM-Y | |||||
1 | XS6W-6LSZH8SS100CM-Y | |||||
1.5 | XS6W-6LSZH8SS150CM-Y | |||||
2 | XS6W-6LSZH8SS200CM-Y | |||||
3 | XS6W-6LSZH8SS300CM-Y | |||||
5 | XS6W-6LSZH8SS500CM-Y | |||||
7.5 | XS6W-6LSZH8SS750CM-Y | |||||
10 | XS6W-6LSZH8SS1000CM-Y | |||||
15 | XS6W-6LSZH8SS1500CM-Y | |||||
20 | XS6W-6LSZH8SS2000CM-Y | |||||
Green | 0.2 | XS6W-6LSZH8SS20CM-G | ||||
0.3 | XS6W-6LSZH8SS30CM-G | |||||
0.5 | XS6W-6LSZH8SS50CM-G | |||||
1 | XS6W-6LSZH8SS100CM-G | |||||
1.5 | XS6W-6LSZH8SS150CM-G | |||||
2 | XS6W-6LSZH8SS200CM-G | |||||
3 | XS6W-6LSZH8SS300CM-G | |||||
5 | XS6W-6LSZH8SS500CM-G | |||||
7.5 | XS6W-6LSZH8SS750CM-G | |||||
10 | XS6W-6LSZH8SS1000CM-G | |||||
15 | XS6W-6LSZH8SS1500CM-G | |||||
20 | XS6W-6LSZH8SS2000CM-G | |||||
Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR
2
The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use. |
Standard type Cable with connectors on both ends (RJ45/RJ45) ![]() |
Green | 0.5 | XS6W-5PUR8SS50CM-G | ||
1 | XS6W-5PUR8SS100CM-G | |||||
1.5 | XS6W-5PUR8SS150CM-G | |||||
2 | XS6W-5PUR8SS200CM-G | |||||
3 | XS6W-5PUR8SS300CM-G | |||||
5 | XS6W-5PUR8SS500CM-G | |||||
7.5 | XS6W-5PUR8SS750CM-G | |||||
10 | XS6W-5PUR8SS1000CM-G | |||||
15 | XS6W-5PUR8SS1500CM-G | |||||
20 | XS6W-5PUR8SS2000CM-G | |||||
Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (RJ45/RJ45) ![]() |
OMRON | Grey | 0.3 | XS5W-T421-AMD-K | |
0.5 | XS5W-T421-BMD-K | |||||
1 | XS5W-T421-CMD-K | |||||
2 | XS5W-T421-DMD-K | |||||
3 | XS5W-T421-EMD-K | |||||
5 | XS5W-T421-GMD-K | |||||
10 | XS5W-T421-JMD-K | |||||
15 | XS5W-T421-KMD-K | |||||
Rugged type Cable with connectors on both ends (M12 straight/RJ45) ![]() |
Grey | 0.3 | XS5W-T421-AMC-K | |||
0.5 | XS5W-T421-BMC-K | |||||
1 | XS5W-T421-CMC-K | |||||
2 | XS5W-T421-DMC-K | |||||
3 | XS5W-T421-EMC-K | |||||
5 | XS5W-T421-GMC-K | |||||
10 | XS5W-T421-JMC-K | |||||
15 | XS5W-T421-KMC-K | |||||
Ethernet/EtherCAT patch cable |
Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (M12 L right angle/RJ45) ![]() |
OMRON | Grey | 0.3 | XS5W-T422-AMC-K |
0.5 | XS5W-T422-BMC-K | |||||
1 | XS5W-T422-CMC-K | |||||
2 | XS5W-T422-DMC-K | |||||
3 | XS5W-T422-EMC-K | |||||
5 | XS5W-T422-GMC-K | |||||
10 | XS5W-T422-JMC-K | |||||
15 | XS5W-T422-KMC-K | |||||
Ethernet -installation -cable | Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR) | Weidmüller | Green | 100 | WM IE-5IC4x2xAWG24/1-PUR | |
Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR) | Green | 100 | WM IE-5IC4x2xAWG26/7-PUR | |||
Connectors |
RJ45 metallic connector For AWG22 to AWG26 |
![]() |
– | – | WM IE-T0-RJ45-FH-BK | |
RJ45 plastic connector For AWG22 to AWG24 |
![]() |
OMRON | – | – | XS6G-T421-1 | |
RJ45 socket | DIN-rail mount socket to terminate installation cable in the -cabinet | Weidmüller | – | – | WM IE-T0-RJ45-FJ-B |
Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.
Accessories
Appearance | Specifications | Order code | ||
---|---|---|---|---|
![]() |
EtherCAT junction slaves |
3 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.08 A |
GX-JC03 | |
![]() |
6 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.17 A |
GX-JC06 | ||
![]() |
Industrial switching hubs (for EtherNet/IP and Ethernet) |
Quality of Service (QoS): EtherNet/IP control data priority. Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation Current consumption: 0.22 A |
3 ports Power supply connector included |
W4S1-03B |
5 ports Power supply connector included |
W4S1-05B | |||
5 ports Power supply connector and connector for informing error -included |
W4S1-05C | |||
![]() |
SD memory card | 2 GB | HMC-SD291 | |
4 GB | HMC-SD491 | |||
![]() |
DIN track | Length: 0.5 m; height: 7.3 mm | PFP-50N | |
Length: 1 m; height: 7.3 mm | PFP-100N | |||
Length: 1 m; height: 16 mm | PFP-100N2 | |||
![]() |
End plate to secure the units on the DIN rail | PFP-M (2 pcs) | ||
![]() |
Battery for NX/NJ CPU unit | CJ1W-BAT01 | ||
![]() |
End cover |
End cover for NX1 and NX1P CPU units (Provided with the CPU unit) |
NX-END02 | |
End cover for EtherCAT communication coupler unit (Provided with the EtherCAT communication coupler unit) |
NX-END01 |
Computer software
Specifications | Order code |
---|---|
Sysmac Studio Lite Edition
2 version 1.23 or higherSame functionality
and supported devices than Sysmac Studio Standard Edition except
for controller. The Lite Edition only supports the NX1, NX1P and
NJ1 machine controllers. |
SYSMAC-LE____
2
Refer
to the Sysmac Studio datasheet (Cat. No. SysCat_I181E) for detailed
information or contact your OMRON representative. |
Como o podemos ajudar?
Se tiver alguma questão ou pretender solicitar um orçamento, contacte-nos ou envie um pedido.
Contactar NX1

Obrigado por ter feito o seu pedido. Entraremos em contacto consigo logo que possível.
Temos experienciado dificuldades técnicas. O seu pedido não foi submetido com sucesso. Por favor aceite as nossas desculpas e tente novamente mais tarde. Detalhes: [details]
DownloadOrçamento para NX1
Através deste formulário pode pedir um orçamento para o produto que escolheu. Por favor complete os campos marcados com *. Os seus dados serão tratados confidencialmente.

Obrigado por ter pedido uma cotação. Enviaremos a respectiva informação logo que possível.
Temos experienciado dificuldades técnicas. O seu pedido não foi submetido com sucesso. Por favor aceite as nossas desculpas e tente novamente mais tarde. Detalhes: [details]
DownloadEtherCAT Redundancy

A redundância minimiza os períodos de inactividade
Mesmo que uma parte da rede EtherCAT esteja desligada, a redundância de cabos proporciona uma conectividade contínua.
Esta função permite resolver o corte de ligação sem parar as máquinas e a linha de produção, sendo que um controlador possibilita o controlo tanto da máquina como da segurança.
Direct access to SQL Database
Stored procedure

O que é o procedimento armazenado?
O procedimento armazenado é uma das funções da base de dados. Um grupo de instruções SQL é armazenado numa base de dados, permitindo executar o processamento complexo com uma chamada. A função de chamada de processamento armazenado, para activar o procedimento armazenado numa base de dados a partir do controlador, foi adicionada à versão 2.0.

Ligação segura entre FA e IT
A autenticação baseada em certificados de servidor e comunicações encriptadas garante a ligação segura entre o servidor da base de dados e a unidade CPU.*1

Recolha de dados 5 vezes mais rápida do que com o método anterior
A função Inserir em lote pode armazenar vários tipos de dados durante um longo período, tal como um registador de dados de eventos. Isso permite identificar as causas das paragens da linha, através da análise dos dados recolhidos em cada leitura.*1*2

Geração automática de tabelas a partir de estruturas e vice-versa
Uma tabela da base de dados pode ser gerada automaticamente a partir de uma estrutura e uma estrutura pode ser gerada automaticamente a partir de uma tabela da base de dados. O tempo de mapeamento pode ser reduzido.*1
1. Disponível no NX701-1□20 e NX102-□□20. Estará brevemente disponível no NJ□01-□□20.
2. Em comparação com quando são realizadas múltiplas inserções.
3. É necessário um procedimento armazenado para eliminar tabelas.
Produtos relacionados
-
Servomotor Sysmac para uso geral
-
Maior produtividade e ambiente mais seguro
-
De uma única máquina a uma linha de produção completa, a segurança está interligada
-
Segurança integrada em automação de máquinas
-
Aumente a sua produtividade
-
Série NA – A HMI do Sysmac
-
Desempenho e viabilidade para controlo de máquinas
Downloads

NJ/NX-series -[EtherCAT]- CKD ABSODEX AX9000TS/TH-U5 driver Guia de ligações
Inicie sessão ou registo ao conteúdo desta página

NJ/NX-series -[EtherCAT]- Hitachi ADV-Series AC Servo Drives Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- Inficon gauge (BPG402-SE) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- Kashiyama Dry Vacuum Pump (E-CAT01 1ch) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD Sensor (PPX series) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD Sensor (WFC series) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página

NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD WFK2 Flow sensor Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- MTS Sensors (E-Series) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- PATLITE Beacon (NE-IL) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página