
NJ3
Controlador Sysmac - Série NJ3
A série NJ3 aumenta a solução do controlador Sysmac para 4 e 8 eixos.
- Tempo de ciclo mais rápido: 500 µs
- Número de eixos: 8, 4
- Núcleo de motion sincronizado
- Funções: sequência lógica e movimento
- Capacidade para efectuar múltiplas tarefas
- Portas EtherCAT e EtherNet/IP incorporadas
- A topologia em anel EtherCAT é suportada para manter as comunicações e o controlo em caso de uma falha no dispositivo ou um cabo danificado
Especificações e info encomendas
Ordering information
NJ series system

NJ series expansion racks

Power supply units
Note: Power supply units for the CJ Series cannot be used as a power supply for a CPU rack of the NJ System or as a power supply for an expansion rack.
NJ3 series CPU units
Note: The end cover unit CJ1W-TER01 is included with the CPU unit.
CJ series digital I/O units
Note: MIL = Connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1).
CJ series analog I/O and control units
Accuracy1 |
||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Universal inputs, with zero/span adjustment, configurable alarms, scaling, sensor error detection |
||||||||||||
Offset/gain adjustment, scaling, peak hold, moving average, alarms, output hold |
||||||||||||
All inputs individually isolated, configurable alarms, maintenance functions, user-defined scaling, zero/span adjustment |
||||||||||||
Configurable alarms, maintenance functions, user-defined scaling, zero/span adjustment, square root, totaliser |
||||||||||||
Basic I/O unit, setup by DIP switches, adjustable filtering |
||||||||||||
Basic I/O unit, setup by DIP switches, adjustable filtering |
||||||||||||
CJ series special I/O units
CJ series communication units
CJ1W-EIP212 |
|||||||||
CJ1W-ECT213 |
|||||||||
CJ1W-CRM214 |
|||||||||
RS-232C to RS-422A/RS-485 signal converter. Mounts directly on serial port |
CJ series ID sensor units
0.265 |
0.131 |
|||||||
Note: The data transfer function using intelligent I/O commands can not be used.
Expansion racks
CJ series I/O control unit (mounted on CPU rack when connecting expansion racks)
Note: Mount to the right of the power supply unit.
I/O connecting cables
EtherCAT junction slave
- Note 1. Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC_81/_82.
- 2. EtherCAT junction slave cannot be used for Ethernet/IP and Ethernet.
Industrial switching hubs
![]() |
Quality of Service (QoS): EtherNet/IP control data priority. Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation |
||||||
Recommended EtherCAT and EtherNet/IP communication cables
Cable with connectors on both ends ![]() |
|||||||
Cable with connectors on both ends ![]() |
|||||||
Cable with connectors on both ends (RJ45/RJ45) ![]() |
|||||||
Cable sheath material: PUR1 |
Cable with connectors on both ends (RJ45/RJ45) ![]() |
||||||
Cable with connectors on both ends (RJ45/RJ45) ![]() |
|||||||
Cable with connectors on both ends (M12 straight/RJ45) ![]() |
|||||||
Cable with connectors on both ends (M12 L right angle/RJ45) ![]() |
|||||||
Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR) |
|||||||
Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR) |
|||||||
DIN-rail mount socket to terminate installation cable in the cabinet |
Note: Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.
WE70 FA wireless LAN units
![]() |
||||
Note: Special versions are available for USA, Canada, China and Japan.
NJ series options and accessories
Computer software
SYSMAC-SE2___8 |
1.
Accuracy for voltage and current inputs/outputs as percentage of full scale and typical value at 25°C ambient temperature (consult the operation manual for details)
Accuracy for temperature inputs/outputs as percentage of process value and typical value at 25°C ambient temperature (consult the operation manual for details)
2. Supported only by the EtherNet/IP units with unit version 2.1 or later, CPU units with unit version 1.01 or later and the Sysmac Studio version 1.02 or higher.
3. Supported only by the CPU units with unit version 1.10 or higher and the Sysmac Studio version 1.13 or higher.
4. Supported only by the CPU units with unit version 1.01 or higher and the Sysmac Studio version 1.02 or higher.
1.
Accuracy for voltage and current inputs/outputs as percentage of full scale and typical value at 25°C ambient temperature (consult the operation manual for details)
Accuracy for temperature inputs/outputs as percentage of process value and typical value at 25°C ambient temperature (consult the operation manual for details)
2. Supported only by the EtherNet/IP units with unit version 2.1 or later, CPU units with unit version 1.01 or later and the Sysmac Studio version 1.02 or higher.
3. Supported only by the CPU units with unit version 1.10 or higher and the Sysmac Studio version 1.13 or higher.
4. Supported only by the CPU units with unit version 1.01 or higher and the Sysmac Studio version 1.02 or higher.
Como o podemos ajudar?
Se tiver alguma questão ou pretender solicitar um orçamento, contacte-nos ou envie um pedido.
Contactar NJ3

Obrigado por ter feito o seu pedido. Entraremos em contacto consigo logo que possível.
Temos experienciado dificuldades técnicas. O seu pedido não foi submetido com sucesso. Por favor aceite as nossas desculpas e tente novamente mais tarde. Detalhes: [details]
DownloadOrçamento para NJ3
Através deste formulário pode pedir um orçamento para o produto que escolheu. Por favor complete os campos marcados com *. Os seus dados serão tratados confidencialmente.

Obrigado por ter pedido uma cotação. Enviaremos a respectiva informação logo que possível.
Temos experienciado dificuldades técnicas. O seu pedido não foi submetido com sucesso. Por favor aceite as nossas desculpas e tente novamente mais tarde. Detalhes: [details]
DownloadEtherCAT Redundancy

A redundância minimiza os períodos de inactividade
Mesmo que uma parte da rede EtherCAT esteja desligada, a redundância de cabos proporciona uma conectividade contínua.
Esta função permite resolver o corte de ligação sem parar as máquinas e a linha de produção, sendo que um controlador possibilita o controlo tanto da máquina como da segurança.
Produtos relacionados
-
Servomotor Sysmac para uso geral
-
Maior produtividade e ambiente mais seguro
-
Segurança integrada em automação de máquinas
-
Aumente a sua produtividade
-
Série NA – A HMI do Sysmac
-
Desempenho e viabilidade para controlo de máquinas
-
8 a 64 pontos por unidade - entrada, saída ou misto
-
Aberta a qualquer comunicação
-
Adiciona controlo de movimento a qualquer PLC de CJ
-
Da E/S analógica básica ao controlo de temperatura avançado
Downloads

NJ-series -[DeviceNet]- ABB IRC5 Robot Controller Guia de ligações
Inicie sessão ou registo ao conteúdo desta página

NJ-series -[DeviceNet]- ABB IRC5 Robot Controller Guia de ligações
Inicie sessão ou registo ao conteúdo desta página

NJ-series -[EtherCAT]- Balluff BNI ECT-508 Guia de ligações
Inicie sessão ou registo ao conteúdo desta página
_cg_en.jpg)
NJ-series -[EtherCAT]- Balluff RFID (BIS V Series) Guia de ligações
Inicie sessão ou registo ao conteúdo desta página